-
TIDAL-RMD-cabinet, 4° degrees inclination design
- 1 x 173 mm (7")
Thiel & Partner (Accuton) woofer with white ceramic-diaphragm
- 1 x 30 mm (1,2")
Thiel & Partner (Accuton) tweeter with black diamond-diaphragm
- passive crossover
network with ultra low tolerance components, exclusive use of Supremecap-MKP-capacitors,
metalfilm-resistors, massive copperband air-core-inductors, microphonically
isolated x-over board
- extremly linear
frequency response, excellent step response, optimised phase and group
delay
- massive silver/goldplated
soft-copper binding posts with removeable heads for fullsize-eylets,
spades and banana's
- serial
accessory: 1 professional ATA-flightcase with all components and parts
inside, microfibre-cleaning cloth, owners manual, original Amea-Isolatorstand
in black piano finish, 2 complete sets 'speaker-to-stand' isolators,
2 complete sets 'stand-to-ground' isolators, all stainless steel screws
and tools to assemble it
- serial
cabinet finish, high gloss polished piano lacquer: midnight black
- optional
veneer-group 1, high gloss polished woods in piano lacquer: tiger-eucalyptus,
curled-bubinga, rose-bubinga
- optional
veneer-group 2, high gloss polished woods in piano lacquer: african
pyramided mahogany, ebony-macassar
- alternative
choice for veneer-group 1 and 2: natural silky-dull finishes (non-glossy
finish with a noble silky-dull shining)
- other
wishes or veneers: on request
|
- drivers:
1 x 30 mm tweeter, 1 x 173 mm woofer
- nominal
power input: 100 / 250 VA
- nominal
impedance: 6-8 Ohm
- frequency
response: +/- 0.9 dB (FFT, 8ms, 150Hz - 10.000Hz) F3 = 42 Hz,
Fmax -3dB@37.000Hz
- recommended
amp input: We recommend quality instead quantity. Real 40 Watt
at 8 Ohm are ok for normal listening levels (in rooms up to 30-40m²).
To use the whole dynamic range of it and for listening complex music
also from time to time very loud we recommend >120 watts at 8 ohm.
- efficiency:
since mostly unrealistic numbers of competitors we don't want
to confuse clients by comparing non-saying numbers on paper. Therefore
it is: "Good efficiency, an easy load also for tube amps / SET's".
- dimensions:
47 cm x 22 cm x 33 cm
- weight:
187 lbs. / 83 Kg (pair incl. packaging)
|